Working on Philco Model 37-623-J - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Working on Philco Model 37-623-J (/showthread.php?tid=18410)

---

RE: Working on Philco Model 37-623-J - Radiofanatic - 09-06-2018

Thank you

---

RE: Working on Philco Model 37-623-J - Kenradio - 09-06-2018

Hi John, here's a picture of the socket connection to my ARBE III that I use to run mu 38-643B & 37-38B radios that I have in my collection. I couldn't find my 37-623 service data but located my 37-643 service data which also covers the 38-643 chassis and took a pic of the battery connector which shows the voltages. For the -3 volts I used the -4.5 volt connection on the ARBE III and it works fine.  Thanks,  Ken

---

RE: Working on Philco Model 37-623-J - Radiofanatic - 09-06-2018

Thanks again Ken !!

---

RE: Working on Philco Model 37-623-J - Radiofanatic - 09-26-2018

Hi all,
Can anyone tell me where the Battery leads go to each tube on this radio? The Schematic is not very clear.

---