Model 610 Grommets - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Cabinet Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=9)
+--- Thread: Model 610 Grommets (/showthread.php?tid=12300)

---

Model 610 Grommets - Pepperoni - 05-18-2015

I only know of Renovated Radios as a source of grommets. I have a Model 610 Cathedral that needs two (2) chassis to bottom of cabinet grommets and two (2) that go on the front of the chassis. There are pegs (3/8" X 1/2") that are part of the chassis that I believe cushion the radio in the front or help to maintain a certain spacing. Grommets fit over these pegs.

Where can I find these grommets? Nothing specified at Renovated Radios.

Thanks,
Johnny

---

RE: Model 610 Grommets - klondike98 - 05-18-2015

I believe you want the small "Philco Eccentric Chassis Supports
(GPH-eccentric)" and I think I just used some of the CW1, CW2 or CW3 washers. I had some of each and just picked the best fit. All from Renovated Radio.

---