37-10 mica cap - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: 37-10 mica cap (/showthread.php?tid=12766)

---

37-10 mica cap - ttmiller - 07-23-2015

37-10 schematic calls for 110uuf cap #45.
The cap is mica (broken lead) with 3 dots.
1st dot = blue
2nd dot same color as body of cap
3rd color = yellow.
Could use help to figure out what value to use and what kind.
Thanks
Terry

---

RE: 37-10 mica cap - Bob Andersen - 07-23-2015

I've seen those colors on a few Philco mica caps. I think it was their own color scheme ? A modern 110pF 500 volt mica will work just fine. 100 or 120 are plenty close enough too.

---

RE: 37-10 mica cap - klondike98 - 07-23-2015

Blue Yellow was the Philco code for 110pF. See Chucks page on mica cap values.

---

RE: 37-10 mica cap - ttmiller - 07-24-2015

Wow! Thanks! I'm off and running.

---