41-280 Color Scheme - Printable Version
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Cabinet Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=9)
+--- Thread: 41-280 Color Scheme (/showthread.php?tid=12786)
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Cabinet Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=9)
+--- Thread: 41-280 Color Scheme (/showthread.php?tid=12786)
41-280 finish - Edisla - 04-26-2015
I believe this is the stock finish.
How did they go about doing the dark edges?
[Image: http://i1289.photobucket.com/albums/b519/Edisla/IMG_2327_zps4tfwlcs4.jpg]
RE: 41-280 finish - Fred Taylor - 04-26-2015
You can use a marker of your choice of color like extra dark walnut or black from Mohawk, or just get a black magic marker and draw it in also , they all will accept being cleared coated over. Or mask the area off and tone it dark with spray can or air brush, but that's a lot more work. just use a marker with a steady hand
41-280 Color Scheme - Edisla - 07-27-2015
Other than the thin lines on many of the edges on the head I am not sure what I should use.
The base is so worn out I can't tell if it is darker than the rest of the cabinet.
Thoughts on how I should tone this up???
RE: 41-280 Color Scheme - Fred Taylor - 07-27-2015
(07-27-2015, 09:17 PM)Edisla Wrote: Other than the thin lines on many of the edges on the head I am not sure what I should use.There is a very good picture of a 41-180x ands looks to be factory finish in the gallery section, you can use that picture as a guide for your color choices
The base is so worn out I can't tell if it is darker than the rest of the cabinet.
Thoughts on how I should tone this up???
The base looks like extra dark walnut, there is photo finish on that set , and should not be messed with unless its screwed up, and redoing that is a different matter
RE: 41-280 Color Scheme - Edisla - 08-01-2015
Hmm if that is really a stock finish.
I'll keep this in mind.
Any other thoughts?
RE: 41-280 Color Scheme - ccomer1955 - 09-02-2015
I've been working on the same cabinet the past couple of weeks, and I've seen many examples with what looks like the same toner used on the sides, the base, and the top. Kind of a reddish brown (red mahogany?). Many of those look like the burled piece where the Philco decal goes and the photofinish are darker. Like this: https://www.pinterest.com/pin/354588170632022363/
or this:
http://www.texasvintageaudio.com/clientcomments.html
RE: 41-280 finish - ccomer1955 - 09-02-2015
The marker trick works pretty well. What color would you call the rest of the cabinet? I have one I'm working on right now, and on mine, it looks a bit more reddish than that photo looks on my screen. Maybe I should take the cabinet out on the front drive before I commit to a tone.
RE: 41-280 Color Scheme - Edisla - 09-07-2015
Well here is how it came out.
My attempt to recreate the photo finish wasn't to bad IMO.
[Image: http://i1289.photobucket.com/albums/b519/Edisla/IMG_2790_zpsvbhhp4bu.jpg]
RE: 41-280 Color Scheme - klondike98 - 09-08-2015
RE: 41-280 Color Scheme - Edisla - 09-08-2015
Don't care so much for this set of decals I have. The transparent part doesn't appear to hide as well as a set I got from a different seller.
RE: 41-280 Color Scheme - Fred Taylor - 09-11-2015
(09-08-2015, 04:08 PM)Edisla Wrote: Don't care so much for this set of decals I have. The transparent part doesn't appear to hide as well as a set I got from a different seller.
Did you apply decal before your few last coats of clear? If not there is a product called solfast, you can get it at a hobby shop most of the time. Any way you apply this clear liquid with a small modeling paint brush over the decal and it will get rid of the haziness of the decal and the edge that you see. It melts the decal into the surface without distorting the decal . Its widely used for models where the decal has to look like it was painted on getting into crevices and melting into depressions and rivets such as older airplanes and train cars .Use this only of you haven't cleared over the decal when refinishing. It will not hurt the clear coat. Always try to apply decal before your last two coats of clear coat and you would not have this problem.
RE: 41-280 Color Scheme - Edisla - 09-12-2015
Interesting I'll have to look into that.
I did apply decal before the last coats.
I'll check into solfast if I run into this on the next radio ;)
RE: 41-280 Color Scheme - Fred Taylor - 09-12-2015
(09-12-2015, 09:48 AM)Edisla Wrote: Interesting I'll have to look into that.
I did apply decal before the last coats.
I'll check into solfast if I run into this on the next radio ;)
The clear coat should have made the decal transparent on the clear portion of decal. I suspect moisture under decal making it a little cloudy. Make sure decal is dry before clear is sprayed on.
RE: 41-280 Color Scheme - Edisla - 09-13-2015
Well here she is
[Image: http://i1289.photobucket.com/albums/b519/Edisla/20150912_140359_zpskfuzfq2j.jpg]
Video of her playing
https://www.youtube.com/watch?v=DPXeu3nl1iA