Reattaching veerner - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Cabinet Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=9)
+--- Thread: Reattaching veerner (/showthread.php?tid=1347)

---

Reattaching veerner - mandh - 09-06-2008

I had to replace the veener on the front and rear edges of my Model 60 front panel and came up with following solution. I bought some binder clips in local my office supply store and after applying glue to the loose veerner I used the clips, with some wax paper, to hold the veerner in place until the glue dried. I spaced the clips about 0.5 inches apart and they apply enough pressure to ensure a good bond between the veerner and the cabinet.

---

Re: Reattaching veerner - Ron Ramirez - 10-01-2008

Thanks very much for sharing this tip, Harv.

---