Escutcheon for Model 42-358? - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Cabinet Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=9)
+--- Thread: Escutcheon for Model 42-358? (/showthread.php?tid=13854)

---

Escutcheon for Model 42-358? - Sourbone - 01-15-2016

Hello, I'm wondering if there is a resource for the plastic escutcheon/faceplate for a Model 42-358 console. I haven't found anything online. 

Thanks, 

Dave

---

RE: Escutcheon for Model 42-358? - Ron Ramirez - 01-15-2016

There isn't...sorry. Your only recourse is to find a junk set with a halfway decent escutcheon. They will all have warpage to a greater or less degree, thanks to the Tenite which was used then.

As 3D printing becomes more common, the time may come when these can be easily reproduced...

---

RE: Escutcheon for Model 42-358? - Sourbone - 01-15-2016

Shoot. Thanks for your answer.

Dave

---