The PHILCO Phorum
Philco Phonograph - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco Phonograph (/showthread.php?tid=142)



Philco Phonograph - Guest - 12-16-2005

I have a Philco 48-1263 and am looking for service notes on the record changer in that set. I need to know the lubrication points. I'm betting the changer has not been lubed since Ike was in the White House.

Joe Connor


- Jerry Huelsbeck - 12-18-2005

Hi Joe,
Chuck S. over at the Philco Repair Bench, will have the record player service data. Did that set use the D10 changer? If so, there is a whole booklet on it.
I wouldnt play it without taking it apart first and cleaning the old hardened grease off of all shafts etc. Alot of them used a plastic gear in the eject mode, that if everything is stiff, usually thats the part that will get stripped when you try and play it.


- Chuck Schwark - 12-18-2005

Yes, a D-10. He already got it over in ARF.


- Jerry Huelsbeck - 12-18-2005

Ok - so I'm a little slow - I blame it on the temperature here in sunny WI - currently at 4 degrees!
Icon_surprised


- Chuck Schwark - 12-19-2005

I'm in sunny (3deg.) Evanston - on your doorstep, geographically speaking... 8)