Philco 89 code 123 switch replacement - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco 89 code 123 switch replacement (/showthread.php?tid=16802)

---

Philco 89 code 123 switch replacement - Jim Dutridge - 06-09-2017

My model 89 came with a replacement on/off switch and no connection for changing bands. I have obtained a replacement switch and need to know where the band switch connections need to be made. As you can see most of this chassis appears unmolested except for the switch.

[Image: http://i248.photobucket.com/albums/gg187/jdut123/IMG_20170609_151804221_zps4imowwlf.jpg]

[Image: http://i248.photobucket.com/albums/gg187/jdut123/IMG_20170609_152100446_HDR_zps3b8ukjle.jpg]

---

RE: Philco 89 code 123 switch replacement - RadioDR401 - 06-10-2017

Jim, here are some photos from my 89 that should help.

   

   

   

---

RE: Philco 89 code 123 switch replacement - Jim Dutridge - 06-11-2017

Thank you Dave, those will be very helpful.

---

RE: Philco 89 code 123 switch replacement - Jim Dutridge - 08-06-2017

Well, my 89 lives and the alignment went smoothly. Now just need the chassis washers, ordered from renovated radios, and a spring for the dial cord and I will consider the chassis portion done.

---