Schematic for 48-230 - Printable Version
+- The PHILCO Phorum (
https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (
https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (
https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Schematic for 48-230 (
/showthread.php?tid=1985)
Schematic for 48-230 - Guest - 08-26-2009
I am working on a 48-230 "Wedge." I have recapped it and checked the tubes, but am getting very weak reception -- virtually inaudible during the day, and only low volume at night, when I do get DX reception from Buffalo, Canada, and other locations (I'm in southern MD).
I've been working without a schematic because I couldn't find one in Riders or any other source I can access. I have found the 49-500 schematic, which has an identical tube line up and chassis layout. Can I count on this as a guide to use in trouble shooting this set?
Thanks for any guidance and help!
Sam
Re: Schematic for 48-230 -
Zapped - 08-28-2009
If you don't mind putting out a few bucks, try this:
http://cgi.ebay.com/PhotoFact-Manual-PHILCO-48-225-/-48-230-(37)_W0QQitemZ360179113210QQcmdZViewItemQQimsxZ20090812?IMSfp=TL090812149005r37853#ht_500wt_956
Re: Schematic for 48-230 - Guest - 08-28-2009
Thanks, Zapped!
It's surprising that such a popular radio is not in Riders.