So! Am I a big dumby? - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: So! Am I a big dumby? (/showthread.php?tid=2167)

---

So! Am I a big dumby? - Music in a bottle - 01-18-2010

I should have known better. I am looking to get a 37-610T bullet radio, and bought a servive manual ahead of the radio. Upon looking closer, I see the manual is to a 37-610 not a 37-610T. So are these the same chassis or do I get the big DAH! award?

---

Re: So! Am I a big dumby? - Ron Ramirez - 01-18-2010

Don't worry, it is the same...that is, unless you have a Service Bulletin for a 37-610 Code 121 or 122, and end up owning a 37-610 Code 125 or 126.

The main difference is that the RF units are different. Also, if you want a table model it will be Code 122 or 126 (the rectifier tube is behind the power transformer, not mounted on top of it as in Codes 121 or 125).

---

Re: So! Am I a big dumby? - Music in a bottle - 01-18-2010

Thanks Ron. I thought that might be the case but wasn't sure. It only cost me a few bucks, and it is an original copy. Now I just gots to locate a radio.

---