Anyone install a cooling fan in these radios? - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Anyone install a cooling fan in these radios? (/showthread.php?tid=21725)

---

Anyone install a cooling fan in these radios? - ODPILOT - 10-20-2020

    The radio chasisis and surrounding area inside my 53-1750 get VERY warm - this is from a combination of a 10W resistor  and the tubes - has anyone ever installed a cooling fan to keep the components and the general insides of the radio cooler??  I'm thinking it couldn't hurt??  Thnx

---

RE: Anyone install a cooling fan in these radios? - morzh - 10-20-2020

These radios were made to work at these temperatures. I am not sure they really require cooling.
And the wattage dissipated by your resistor: if it is the same resistance that whatever you replaced it with had before, it then dissipated the same exact amount of power, and the temperature would be the same.

---