chassis support bushings/pads - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Home Radios (https://philcoradio.com/phorum/forumdisplay.php?fid=6)
+--- Thread: chassis support bushings/pads (/showthread.php?tid=22624)

---

chassis support bushings/pads - fenbach - 07-12-2021

i'm looking to replace the rubber [sometimes cork] bushings/pads that support the chassis. of a model 60 in my case. the rubber ones in the radio are 5/16" thick and not quite an inch in diameter. with a small hole for the lag-type screw that threads in from below. anyone know of a supplier? or what to ask for at the hardware store.
thanks.

---

RE: chassis support bushings/pads - Patrick - 07-12-2021

http://www.renovatedradios.com/index.php?

---

RE: chassis support bushings/pads - David - 07-13-2021

If you want to try and make your own.   https://www.mcmaster.com/rubber-sheets/

---

RE: chassis support bushings/pads - Arran - 07-14-2021

Here is another long time popular supplier for vintage electronics https://www.tubesandmore.com/search/node/rubber%20washer though they quote 1/4'' for washer thickness.
Regards
Arran

---

RE: chassis support bushings/pads - fenbach - 07-14-2021

big difference in price!

---