Connection for Philco 95 #3754 B+ recap - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Connection for Philco 95 #3754 B+ recap (/showthread.php?tid=541)

---

Connection for Philco 95 #3754 B+ recap - 49Stude63 - 12-27-2006

I cleaned out the B+ can and I have the service data for the model 95 and it appears that I should make these connections,
lead 1 -0.05uf cap to chassis ground (lead 11)
lead 2 -wire connection to lead #1
lead 3 -2.0uf connection to lead #10
lead 4 -0.5uf to chassis ground (#11)
lead 5 -0.15uf to chassis ground
lead 6 -0.5uf to chassis ground
lead 7 -1.0uf to chassis ground
lead 8 -0.15uf to lead #9
lead 9 -2.0uf to lead 3-10 after 2.0 cap

Have I correctly decoded the chart?

---

- Chuck Schwark - 12-28-2006

Claude,

Use the schematic diagrams here on Ron's site to double-check. The can terminals and cap values are listed on the schematics for both versions of the Model 95.

Here is the Early Version:
http://www.philcoradio.com/tech/images/95e.jpg

...and the Late Version:
http://www.philcoradio.com/tech/images/95.jpg

---