dial cord - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: dial cord (/showthread.php?tid=5441)

---

dial cord - vinzer - 11-08-2012

I have a model 19b with worn spot that slips from about 1100 to 1200 it looks worn there to it has a biger diameter than most dial cords what can be used to replace it?

Thanks

---

RE: dial cord - murf - 11-08-2012

I like to use rubber o-ring material.
Cut about 1/2 inch short and superglue it together.
Works good.
You can get it from Mcmaster Carr.

---