PT-2 transitone... where does the wire go? - Printable Version
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: PT-2 transitone... where does the wire go? (/showthread.php?tid=5741)
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: PT-2 transitone... where does the wire go? (/showthread.php?tid=5741)
PT-2 transitone... where does the wire go? - NostalgiaRadioTime - 01-10-2013
There's a black rubber wire on pin 4 of the 50L6 tube, but it is disconnected on the other end. Can anyone tell me where it connects? Thanks!
RE: PT-2 transitone... where does the wire go? - BrendaAnnD - 01-10-2013
Pin 4 on a 50L6 is the screen grid. According to the schematic, it's connected to one of the filters and to one side of the speaker field coil. That wire could well have been going to the speaker field coil.