80 Jr Troubleshooting- B+ measurements - Printable Version
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: 80 Jr Troubleshooting- B+ measurements (/showthread.php?tid=7006)
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: 80 Jr Troubleshooting- B+ measurements (/showthread.php?tid=7006)
Pages:
1
2
RE: 80 Jr Troubleshooting-Solved! - klondike98 - 07-12-2013
Mondial,
Re: checking B+
My line voltage was at 109v from the isolation transformer so I made another set of measurements with full line voltage at 120v. Bias across the 325ohm resistor is 16v. Getting 328 ac volts per plate on the 80 rectifier whereas I was only getting 300 before.
[Image: https://www.dropbox.com/s/nwmo4vfobvyzwi3/80volts.jpg?raw=1]
Does sound better and getting a number of stations at this point. Thanks!