The PHILCO Phorum
Tone control rebuild - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Tone control rebuild (/showthread.php?tid=8301)



Tone control rebuild - baspas - 12-30-2013

According to the parts list the tone control for my 16B should be a 30-4033 but what's under the chassis is a 30-4069, probably not much difference. Does anyone know what caps are inside and where they connect to? There are two small black wires that come out of the block and connect to the control and one red and one black that connect elsewhere under the chassis. Thanks, Brett


RE: Tone control rebuild - jerryhawthorne - 12-30-2013

Brett, perhaps this link might help.
http://www.philcorepairbench.com/tonectl.htm

Jerry


RE: Tone control rebuild - baspas - 12-30-2013

Thanks Jerry, neither of my numbers were on that list plus I could use a little more info.
Brett


RE: Tone control rebuild - morzh - 12-30-2013

I do not have 16B sch, I only have 16 - doesn't the sch show the caps in the tone control separately? At least in several Philcos I've dealt with it does, like in 90's tone control I've just rebuilt.


RE: Tone control rebuild - Kirk Miskimon - 01-05-2014

    Brett,

I hope that you find this helpful