Guest Join UsHello Guest,
Please feel free to join us!
Unlock sections of the Phorum that non-members cannot see.
Sign up for Phorum membership today! or Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Philco 112 Cap Block Restoration, Part 3754
#1
I am attempting my first capacitor block restoration on a Philco 112, part 3754.  I found schematics and it appears the capacitors for the block are one 0.05uf, two 2.0uf, two 0.5uf, two 0.15uf and one 1.0uf.  It's a little hard to read the schematics. Can anyone confirm this and should the voltage for the caps be 630V to be on the safe side?
Thanks.
Reply
#2
Here are the values from service bulletin #54:

   

I would use film caps for all of those (the ones I buy are typically rated at 630V).


Attached Files
.pdf   Philco Service Bulletin No. 054.pdf (Size: 412.75 KB / Downloads: 7)
Reply
#3
There are discrepancies between the caps lists you two have given.
Reply
#4
Yes - there are. I'd go by the service bulletin, unless somebody else knows better.
Reply
#5
If you can go e.me the number on the block I should be able to.look up the  caps.for you.
Reply




Users browsing this thread: 1 Guest(s)

About Philco Phorum

The Philco Phorum is a family-friendly place for the discussion of Philco radios and related items.

Please feel free to join us! Unlock sections of the Phorum that non-members cannot see. Sign up for Phorum membership today!

           Quick Links