|
Philco model 77
09-18-2016, 07:56 PM
http://rs32.pbsrc.com/albums/d5/flathead...0&fit=clip
Here's a photo of the ever elusive parts number page for this set, mine shows a different part number from the 2766, mine shows a 2848, is this the same opt?
09-18-2016, 10:56 PM
I couldn't find that #. Look here http://philcoradio.com/phorum/showthread.php?tid=215 under spkr zip.
When my pals were reading comic books I was down in the basement in my dad's workshop. Perusing his Sam's Photofoacts Vol 1-50 admiring the old set and trying to figure out what all those squiggly meant. Circa 1966 Now I think I've got! Terry
09-19-2016, 12:09 PM
Go to Philco Downloadable Files then Philco free download files it's in there under spkr zip file
When my pals were reading comic books I was down in the basement in my dad's workshop. Perusing his Sam's Photofoacts Vol 1-50 admiring the old set and trying to figure out what all those squiggly meant. Circa 1966 Now I think I've got! Terry 
09-19-2016, 02:01 PM
Here's the link directly to the speaker file:
http://www.philcoradio.com/phorum/attach...p?aid=5181 It should directly download the speakers.zip file to your PC, then you need to unzip it to read it.
09-20-2016, 08:52 AM
I finally found it and downloaded it, however last night I pulled the opt up to get a better look at it and have 2 loose solder joints. I don't know if this is the problem or not but I'll re solder and try again.
09-20-2016, 10:25 PM
So I've gone back and soldered the broken contacts on the speaker to see if I'd get a different reading, it didn't seem to change the readings or voltages on the 45 tubes so it looks like I am now on the hunt for either a new speaker assembly or a new functioning output transformer. What's going to be the best way try to see if anything comes across ebay eventually or try a looking for ad?
01-11-2017, 08:55 PM
-- Ron Ramirez Ferdinand IN
« Next Oldest | Next Newest »
Users browsing this thread: 1 Guest(s) |
