Help with a 38-9

[fixinmyphilco]

Ok I went to replace the rubber bushings that go between the main chassis and the air capacitor and two wires broke off Im pretty sure where A went and soldered the new wire on but B im not sure there was a wire (small grey one coming off from where B is now soldered labeled Cbut it was just hanging there) im not sure that is where it goes any help would be most appreciated Thanks doug

[ipwizard]

Looks to me like you have one connection to the grid cap of the 6A8G tube, and one connection to pin 5 of the 6A8G tube. I only see the two connections on the schematic.





If there was a third one maybe it was a ground? Most of the time the ground are copper braid that usually soldered to the chassis.


Schematic here:
http://www.nostalgiaair.org/PagesByModel...013262.pdf