09-27-2021, 07:48 AM
I sent the Philco 32-3723 oscillator coil to a friend and he checked it out with an CLR meter.
Here are the results:
3 - 2 0.023 < .1
3 - 4 0.028 < .1
1 - 2 0.046 < .1
1 - 4 0.102 < .1
5 - 6 2.245 2
3 - 6 0.472 2.5
3 - 6 seems to be the problem. The broadcast oscillator was workiing and quit.
Is there a chance the schematic has the wrong value for 3 - 6 section?
I have changed 26, the 100 pf capacitor.
I have checked all of the switch contacts.
I have changed all of the electrolytic and paper capacitors.
All suggestions are welcome.
Thank you,
nv3g
Oscar
Here are the results:
3 - 2 0.023 < .1
3 - 4 0.028 < .1
1 - 2 0.046 < .1
1 - 4 0.102 < .1
5 - 6 2.245 2
3 - 6 0.472 2.5
3 - 6 seems to be the problem. The broadcast oscillator was workiing and quit.
Is there a chance the schematic has the wrong value for 3 - 6 section?
I have changed 26, the 100 pf capacitor.
I have checked all of the switch contacts.
I have changed all of the electrolytic and paper capacitors.
All suggestions are welcome.
Thank you,
nv3g
Oscar