The PHILCO Phorum

Can anyone tell me where to hook up the left side of this tuning capacitor, on my Philco 41-300. Somehow, it got left out of the re-wiring process, and my copy of the wafer switch is too poor to read.

This wire goes under the chassis to the band switch, to the wafer section closest to the end of the chassis, down underneath. I could not make out exactly what terminal the wire goes to, sorry. As shown in the photo below, you can't even see the wire coming through the hole:



Looking at the schematic, I see that the wire goes to terminal 12D. Wafer D is closest to the end of the chassis, and terminal 12D would be on the bottom (of course!).