The PHILCO Phorum

This is for restuffing quad electrolytic from Zenit 6G001Y, 2x40uF 200V, 20uF 200V and 200uF 10V.


First, the cap is taken out.

[attachment=892]

Then the flare is lifted.

[attachment=893]

The ground ring is taken out.

[attachment=894]

Then the cap is heated and the innyrds are extracted.

The cap is disemboweled, the guts are cut off.
[attachment=897]
The new caps are added
[attachment=898]
Holes are drilled in the base and the leads are soldered.
[attachment=899]
Caps are wrapped with the tape.
[attachment=900]
The can is replaced, flared and the cardboard shell is put back.
[attachment=901]

Done.