A PITA recap job - Printable Version
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Various and Sundry Categories (https://philcoradio.com/phorum/forumdisplay.php?fid=37)
+--- Forum: Other Radios (Non-Philco) (https://philcoradio.com/phorum/forumdisplay.php?fid=12)
+--- Thread: A PITA recap job (/showthread.php?tid=12638)
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Various and Sundry Categories (https://philcoradio.com/phorum/forumdisplay.php?fid=37)
+--- Forum: Other Radios (Non-Philco) (https://philcoradio.com/phorum/forumdisplay.php?fid=12)
+--- Thread: A PITA recap job (/showthread.php?tid=12638)
RE: A PITA recap job - morzh - 07-01-2015
Oh, Terry will guide him through it. He handled worse
RE: A PITA recap job - Radioroslyn - 07-01-2015
Reminds me of Denver. Went back and forth w/ him a lot. That might have been a little bit before you joined.
So Kirk don't make me come up there and fix that thing!!!!!
May have some time on Sunday if you like. Drop me a PM.
Terry
RE: A PITA recap job - morzh - 07-01-2015
Kirk,
don't let him in unless he brings hamburgers with him. That can justify it
RE: A PITA recap job - OldRestorer - 07-01-2015
I think I am pretty open so if you are up for the drive you are very welcome.
If anyone else wants to join the party there is an open invitation.
This way I can pawn off some radios on you guys
RE: A PITA recap job - OldRestorer - 07-01-2015
Well,
Terry may be coming on Sunday so I made up a little table of the "kirk sucks at this" radios. Only 4 so far
Me
RE: A PITA recap job - sam - 07-01-2015
Lmao he even has parts tray with them
You in trouble terry
Wish I could go but daughter is up from Virginia
This week end
RE: A PITA recap job - OldRestorer - 07-02-2015
Your daughter this, your daughter that!
She is really putting a damper on our friendship. First K-town and now quality time with friends.
Ha Rumph!
Bring her, she can learn to do what daddy does
Me
RE: A PITA recap job - morzh - 07-02-2015
Meaning, drinking beer and fixing rat-peed-on radios?
RE: A PITA recap job - sam - 07-02-2015
hey not my fought
terry`s fault for wanting to come over. one the wrong weekend
I`m willing to wait until mikes not mine cabinets are done
this way I could bring mine and your radio getting tired of holding hostage
many me
RE: A PITA recap job - OldRestorer - 07-02-2015
More cabinets?
[Image: http://www.reactiongifs.us/wp-content/uploads/2014/03/nooooooo_elf.gif]
RE: A PITA recap job - Radioroslyn - 07-05-2015
It's Fixed!!!!
Terry came over and fixed it and a few others.
He's a nice guy!!!
Oh! That's me.
Terry
RE: A PITA recap job - sam - 07-05-2015
what you do wear kirk out
he can only store a little at a time
better watch it mike. terry works fast
RE: A PITA recap job - morzh - 07-06-2015
Competition!
RE: A PITA recap job - sam - 07-06-2015
mike
don`t worry I am sure kirk will save you the exceptional ones
him
RE: A PITA recap job - Radioroslyn - 07-06-2015
That one was a PITA. Wired up the filters and a few stray wires to there appropriate places fired it up and it blew out the 25Z5. After a few more 25Z5's we figured we got us a short in the B+(not in the FC side). Started unsoldering the B+ wires to find it and found it at the IF transformer. Fixed that. Now it was playing but had a nasty 60cy hum and it was modulating the audio. So add 40uf to the filtering and it helped a little. Added more bypassing to the 1st audio and IF amp. Did nothing. Changed out all of the toobs to make sure there wasn't a leaky cathode/grid somewhere. Did nothing. Bypassed the plate of the 75 to B- that helped a lot but still has a fair amount of hum. Now that I've been thinking about it it could be the grid resistor on the 75 is open. This set runs the audio wide open and adjusts the volume by the amount of RF it allows down the ant. It's pretty cramped under the chassis and a PITA to work on.
The other sets when quick. Bad spkr, miswired cap, and figure out what tubes go in this chassis. The barking dog forum gave Kirk the wrong ID for the chassis so when he pulled up the schematic it didn't match. Got it sorted out and when it got back home (abt 9pm) I found the proper model and schematic for it.
A good time was had by all! Kirk is a gracious host kept me well fed and and full of beverage. House looks great too!
Terry