FOMOCO Radio - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco-Transitone Auto Radios (https://philcoradio.com/phorum/forumdisplay.php?fid=7)
+--- Thread: FOMOCO Radio (/showthread.php?tid=13086)

---

RE: FOMOCO Radio - VntgRads - 09-14-2015

That's the antenna trimmer screw.  It usually winds up being screwed in clockwise almost all the way for best reception.  Make sure you have a good antenna connection.  The screw is adjusted by finding a weak station around 1400 and adjusting to maximum volume.  Your radio, however, may be on the fritz.

Craig R

---

RE: FOMOCO Radio - unit91 - 09-14-2015

(09-14-2015, 02:12 PM)VntgRads Wrote:  That's the antenna trimmer screw.  It usually winds up being screwed in clockwise almost all the way for best reception.  Make sure you have a good antenna connection.  The screw is adjusted by finding a weak station around 1400 and adjusting to maximum volume.  Your radio, however, may be on the fritz.

Craig R

I checked my stereo AM stations (on my old Pioneer SX-828 receiver from the 70s) to find a station around 1400.  Found one at about 1430, but can't get anything on the Ford radio.  Do you repair these?

---

RE: FOMOCO Radio - VntgRads - 09-14-2015

^^^
No, I don't do the electrical but just the mechanical/cosmetic portion.  You might want to hold off until you find the proper '68 radio for your car.

Craig R.

---