General Restoration Questions - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Cabinet Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=9)
+--- Thread: General Restoration Questions (/showthread.php?tid=16498)

---

RE: General Restoration Questions - Tgace459 - 04-25-2017

I did use a sanding block on the sides.

---

RE: General Restoration Questions - Kenneth F. Besso Jr. - 04-26-2017

looks like they are HIGH spots,,,, ( I ) would just stain them over again,,,and call it done

---

RE: General Restoration Questions - Tgace459 - 04-26-2017

Lighting and angle makes a difference in how obvious these splotches are. From some angles they all but disappear and from others they are obvious.

---

RE: General Restoration Questions - adamrobertg - 05-01-2017

I had a few spots like that when working on my 38-8 cabinet. I sanded lightly with 800 grit sandpaper to ensure it was smooth, and just hoped toner would cover it. It did, looks fine now- you can't even tell.

---