Philco 144H - How far to go? - Printable Version
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Home Radios (https://philcoradio.com/phorum/forumdisplay.php?fid=6)
+--- Thread: Philco 144H - How far to go? (/showthread.php?tid=18668)
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Home Radios (https://philcoradio.com/phorum/forumdisplay.php?fid=6)
+--- Thread: Philco 144H - How far to go? (/showthread.php?tid=18668)
Pages:
1
2
RE: Philco 144H - How far to go? - morzh - 07-13-2018
I always thought CW is just todays regular radio transmission, ever since Fessenden to invented it to replace Marconi's spark gap. And it should not require anything as this is what all the broadcast station transmit. No?
RE: Philco 144H - How far to go? - Phlogiston - 07-13-2018
CW is the carrier with no modulation.
SSB is just the opposite - one modulation side band with no carrier.
The BFO generates a carrier which becomes a heterodyne with the CW transmission resulting in a tone.
The BFO's carrier is used to demodulate the SSB modulation.
RE: Philco 144H - How far to go? - ChasBett - 07-13-2018
Yes I did refinish the cabinet. Thanks for the compliments. I enjoy refinishing old pieces. I know some say to leave in original condition (don’t refinish) but if I’m keeping the piece I’m finishing it to my liking. It appeals to my meticulous nature and the cabinet being a family heirloom was a bonus. And, yes I was pleased that the cloth was intact, other than a few stretch/poke marks.
See you in the electronics phorum. Hopefully the electronics won’t take me the same six years that I spent off and on getting the cabinet finished.
As I enter the electronics phorum, can you confirm what my chassis is? It isn’t the same as the cabinet style (144H), correct? The sticker inside the cabinet says Philco Models 44,504,& 144. In the lower left corner of that sticker I see 38-3385 (although the 8’s could be 6’s—hard to discern). And inside the chassis is stenciled 38 1222. When I look in the electronics phorum people seem to refer to the chassis by a number and I want to know what mine is as I venture on.
RE: Philco 144H - How far to go? - Radioroslyn - 07-13-2018
Hi Chas,
You might have a look at the back of the tuning capacitor sometimes the model # is stamped on it in ink.
Sorry the link I posted previously was dead try this: http://www.nostalgiaair.org/Resources/137/M0013137.htm
I'm about 99% sure it's a model 144 chassis
GL
RE: Philco 144H - How far to go? - Ron Ramirez - 07-14-2018
I can confirm that it is a 144.
RE: Philco 144H - How far to go? - RadioSvit - 10-01-2018
Very nice radio! It's just a fantastic and stylish design .
