philco 16B - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Home Radios (https://philcoradio.com/phorum/forumdisplay.php?fid=6)
+--- Thread: philco 16B (/showthread.php?tid=2450)

---

RE: philco 16B - Ron Ramirez - 02-02-2019

Thanks for the info Mike, old posts above (posts #2 and 3, page 1, this thread) edited to reflect this fact.

---

RE: philco 16B - morzh - 02-02-2019

Good. I actually went to check it in my 2-year old thread about my 16 to make sure before I posted here.

---

RE: philco 16B - Ron Ramirez - 02-03-2019

Stall-U-Rated reports that Lasco #32 and #60 O-rings (Ace Hardware) also work in the Philco 16 dial drive mechanism.

---

RE: philco 16B - Kenneth F. Besso Jr. - 02-03-2019

Buy assortment KIT from Harbor freight,,,,Metric or standard sizes,,,,Cheap they are

---

RE: philco 16B - radiohenry - 02-04-2019

OK so now I am confused. But what's new. I have not yet done the o-ring replacement on a model 16. This is somewhere in my future I suspect.
Am I understanding correctly that along with the Danco o-rings that I already purchased I will need another round gasket for behind the dial?
                                                               Thanks,
                                                                      Henry

---