41-608 no radio stations - Printable Version
+- The PHILCO Phorum (
https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (
https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (
https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: 41-608 no radio stations (
/showthread.php?tid=20701)
RE: 41-608 no radio stations -
Radioroslyn - 12-19-2019
Methinks you need to replace the choke to supply the hv to the osc section. Let me see what I can find out abt it.
RE: 41-608 no radio stations -
Radioroslyn - 12-19-2019
Well the generally consensus is that it should be abt 3Mh. I have some 2.5Mh jobs but the current rating is much higher than what you need and physically they're fairly large. Can you take a pic of the one that's in there now?
RE: 41-608 no radio stations -
Derek38 - 12-20-2019
Here is the choke and at the bottom of the tube is the resistor that should read 33000 but reads 46000.
RE: 41-608 no radio stations -
Derek38 - 12-20-2019
Well I can't get a photo to upload but the choke is about an inch long black with a green mark.
RE: 41-608 no radio stations -
Derek38 - 12-20-2019
I found a choke on Ebay that is 2.5mh RF Choke 0.17amp 24 ohm and about the same size. 4 of them for 25 dollars
RE: 41-608 no radio stations -
Derek38 - 12-30-2019
The choke arrived today. After replacing most of the resistors and installing the new choke I have full am reception including WSM Nashville! Just need a better antenna for better reception. Thanks for all the help with THIS radio. There will be more when I find them.
RE: 41-608 no radio stations -
Derek38 - 12-30-2019
Now to refinish the cabinet.
RE: 41-608 no radio stations -
Radioroslyn - 12-30-2019
Glad to hear you got it working , it's easy when you know how.
You might want to wire in a 1amp fuse into the ac circuit for safety.
RE: 41-608 no radio stations -
Derek38 - 12-30-2019
Thanks for you help I don't think that I could have done this without your help. My aunt and uncle will really enjoy seeing it work again.