Thoughts on a McMurdo Silver Masterpiece VI Speaker - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Various and Sundry Categories (https://philcoradio.com/phorum/forumdisplay.php?fid=37)
+--- Forum: Other Radios (Non-Philco) (https://philcoradio.com/phorum/forumdisplay.php?fid=12)
+--- Thread: Thoughts on a McMurdo Silver Masterpiece VI Speaker (/showthread.php?tid=6032)

---

RE: Thoughts on a McMurdo Silver Masterpiece VI Speaker - radiohenry - 02-15-2014

Ron,
I say go for it . Just don't start turning consoles into clothes hampers.
Henry

---

RE: Thoughts on a McMurdo Silver Masterpiece VI Speaker - PhilcoJohn - 02-15-2014

Ron ..That was the way to go why spend thousands on a speaker when you can make a couple of adjustments and put another speaker in its place. What are so special about the speaker that came with the set? With todays know how the speakers of today should be a lot better than the ones of the 1930's as long as they can be retrofitted. Let me know what you think.

---

RE: Thoughts on a McMurdo Silver Masterpiece VI Speaker - kirwin - 02-25-2014

Hi all. what is the tube layout for the power amp for the Mcmurdo V1 power amp?

---

RE: Thoughts on a McMurdo Silver Masterpiece VI Speaker - JosCallinet - 01-08-2015

(02-22-2013, 05:43 PM)morzh Wrote:  If this thing drops in your lap.....you won't be able to think of anything else for a while. I promise you.

Sore Bawlz Time, for sure!

---

RE: Thoughts on a McMurdo Silver Masterpiece VI Speaker - JosCallinet - 01-08-2015

Talk about a speaker having an impact!

---

RE: Thoughts on a McMurdo Silver Masterpiece VI Speaker - whirligig - 05-12-2019

Ron,

Thank you for the impedance info on the double field coil in post #10. I was able to test a Masterpiece V last week for my boss after wiring up a suitable choke, resistor, and output transformer based on your measurements. Now that we know the radio works, we can box it up and store it away for future work.

Thanks again,

Whirligig

---