Need Philco 46-350 parts and advice - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Cabinet Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=9)
+--- Thread: Need Philco 46-350 parts and advice (/showthread.php?tid=1051)

---

Need Philco 46-350 parts and advice - FStephenMasek - 04-01-2008

Hello everyone. I just joined and just acquired my first Philcos, a 46-350 and a 41-250.

I need the glass dial scale for a Philco 46-350. I also need to find some feet to replace what is left of the old ones. Any ideas? The four-section can was replaced with cardboard cans, so I also could use an old capacitor and support bracket/clamp.

Which paint color code do you think is best for the metal handle attachments?

Does anyone know the name of that exterior covering material? Do you also know a source for it? My 46-350 is OK, excpet for one small hole, but similar material was used on some portable record players I have.

---

- Sean - 04-02-2008

Hello,

I have a 46-350 parts set. I know I have a good dial glass. I will try to remember to look tonight to see if I have the other parts you need. I don't remember if I kept the cabinet or not.

---

- FStephenMasek - 04-02-2008

Sean - someone else is selling me an entire part set, but thanks for checking.

---