1941 Philco BOL Changer - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: 1941 Philco BOL Changer (/showthread.php?tid=10807)

---

1941 Philco BOL Changer - varrojames - 10-23-2014

I have this changer that I am restoring from a 41-608. It is working but I cannot get the auto reject at the end of playing a record adjusted properly. I can get it to either trip early or not at all. If anyone has worked on one of these can you give me some tips? I have the Philco service manual covering this changer but it doesn't give me any help on this problem.

---

RE: 1941 Philco BOL Changer - Sean - 10-24-2014

I had the exact same problem with this changer that I restored a few years ago.  I ended up cutting a disk of cork and putting it in between the clutch assembly for the reject.  There was no trace of one originally in my changer but there is a part 35-2539 shown in the 1941 RMS service info that might be this disk.

---

RE: 1941 Philco BOL Changer - Sean - 10-24-2014

There are scans of the pages of "Automatic Record Changers and Recorders" by John Rider on the internet.  The changer in the 41-608 was made by Webster-Chicago and I think is a modified model 21 or 22 or something like that.  Maybe someone else can correct me if I'm wrong.  Anyway, start looking at page 670 to see if anything looks familiar:


http://babel.hathitrust.org/cgi/pt?view=image;size=100;id=mdp.39015000973811;page=root;seq=684;num=670

---