42-1003 code 121 bol - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: 42-1003 code 121 bol (/showthread.php?tid=11134)

---

42-1003 code 121 bol - mountain man - 12-08-2014

working on this radio the schematic shows beam of light in the diagram but this unit does not have it, can not tell if std or deluxe model, maybe some one changed out to a regular tone arm any suggestions or info on this.

---

RE: 42-1003 code 121 bol - Chuck Schwark - 12-08-2014

The Model 42-1002 looks identical, except for the skinny 
crystal pickup tonearm.

Chuck

---

RE: 42-1003 code 121 bol - sam - 12-08-2014

pic`s would be helpful too

---

RE: 42-1003 code 121 bol - mountain man - 12-08-2014

       
Chuck,  as you can see it is 42-1003 model 121 so no confusion there. hoping to get your schematic soon so i can get a better view of the internal works of this set.

---

RE: 42-1003 code 121 bol - sam - 12-09-2014

hmm whats the tube line up
1001 is 5, 1002 is 6 , 1003 is 7 tubes
could be a 1002 chassis but marked 1003 ?
sam

---

RE: 42-1003 code 121 bol - mountain man - 12-09-2014

(12-09-2014, 02:59 PM)mafiamen2 Wrote:  hmm whats the tube line up
1001 is 5, 1002 is 6 , 1003 is 7 tubes
could be a 1002 chassis but marked 1003 ?
sam

---

RE: 42-1003 code 121 bol - mountain man - 12-09-2014

7 tube

---

RE: 42-1003 code 121 bol - sam - 12-09-2014

Well looks like you need to find Bol arm and rewire it  

---

RE: 42-1003 code 121 bol - Chuck Schwark - 12-10-2014

Your packet mailed out on 12-8. You should see it very soon.

Chuck

---