metal case capasitors - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: metal case capasitors (/showthread.php?tid=1383)

---

metal case capasitors - tab10672 - 09-24-2008

I am currently restoring a model 50 and a 51 in the near future, schematics list the ratings for the 5 caps. in the single metal box assy. but not color code on which wire goes to which capasitor in the case. Can anyone help with this? Thanks

---

Re: metal case capasitors - Chuck Schwark - 09-24-2008

See the TECH section here on Ron's site for the schematic. That metal-can condeser bank is also shown with values.
Re-stuffing these is easy.

Chuck

---

Re: metal case capasitors - Texasrocker - 09-25-2008

Whoa Pardners! From reading your previous posts, Im having a hard time discerning the differences between a orig metal cased vintage radio "capasitor bank & condeser pack" info! Im trying to figure out if my capasitor, & or a condeser are bad, and need to be replaced on a Zenith 5D-810Y restoration!! (hee hee) Im headed for the B&g area again indeed!!

---