Deviations from Schematic - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Deviations from Schematic (/showthread.php?tid=140)

---

Deviations from Schematic - Robbie Roberts - 12-16-2005

As I am recapping the 37-650, I am noticing things which seem different from the schematic- one in particular is a condensor clipped from its original end point at a tube connection, and relocated to one of the bakelite connectors. Should I replace as was, or as indicated by the schematic?

Just trying to find out so I get it right, and good as new.

Scott

---

- Chuck Schwark - 12-16-2005

See if these "deviations" match any of the Production Change notes. Your chassis could be a later production run than the original Run #1.

If not, then it could be "leftovers" from a previous repair attempt.

---