41-250 extra resistor or schematic eerror? - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: 41-250 extra resistor or schematic eerror? (/showthread.php?tid=1430)

---

41-250 extra resistor or schematic eerror? - FStephenMasek - 10-19-2008

My Philco 41-250 either has a factory wiring error, or the schematic in the Philco manual I obtained is incorrect. The schemettic shows B-minus going to two 470K resistors (part numbers 53 and 54), and the other end of each resistor to a grid on one of the 41 output tubes. My radio had an additional 470K resistor between B-minus and those two resistors.

Do you have any ideas, or have you worked on one of these?

---