Inline fuses by Radiodaze - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Inline fuses by Radiodaze (/showthread.php?tid=14710)

---

Inline fuses by Radiodaze - morzh - 06-02-2016

I bought a couple just in case.

http://www.radiodaze.com/fuse-holders/

#1 at the link.

Now I asked them. The saleswoman did not know. The guy she asked said 250V.
They don't look like no 250V to me.
And, of course , no manufacturer or part #.


PS. Just found 5A/10A one by Littlefuse in Mouser. Seems to be the only one there. And it is $5.60.

---

RE: Inline fuses by Radiodaze - Arran - 06-04-2016

Mike;
  Those look like the fuse holders used inline with modern car stereos, which usually deal with 12 volt supplies, I don't know about using one on full mains voltage or higher.
Regards
Arran

---

RE: Inline fuses by Radiodaze - Ron Ramirez - 06-04-2016

Radio Daze has a representative here on the Phorum - I would encourage you to send a PM to Radiodaze with your questions if they do not reply in this thread.

---