The PHILCO Phorum
Philco model 46-250 Code 125 schematic / service manual - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco model 46-250 Code 125 schematic / service manual (/showthread.php?tid=15961)


Philco model 46-250 Code 125 schematic / service manual - ironmill - 12-26-2016

Hi Folks,

Hope everyone is relaxing and enjoying the holidays. I'm about to restore a model 46-250 code 125. I see schematics for code 121 but can't find a 125 schematic or under chassis photo. They changed the rectifier and output tube when they went to the code 125 along with some their production cut-ins. I'd appreciate it if anyone has the schematic.

Have a safe and happy holiday season,

Regards,
Jim

RE: Philco model 46-250 Code 125 schematic / service manual - klondike98 - 12-26-2016

Welcome to the Phorum!
Icon_wave

They did not always print new schematics for later revisions. Check with Chuck at http://www.philcorepairbench.com/schematics.htm
to see if he might have the info.

RE: Philco model 46-250 Code 125 schematic / service manual - Radioroslyn - 12-26-2016

Hi Jim and welcome,
It was a common practice in post war sets to use  whatever tubes where available do to war shortages. Have serviced sets with a combo of miniature, locktal, and octal all on one chassis. Electrically the tube are the same just different pin outs. 50A5, 50B5, 50C5, 50L6 all the same barring the socket connections. By the early '50s most had gone with using miniatures and the 50C5 replaced the 50B5 because of the pin layout was prone to have plate to heater shorts.

RE: Philco model 46-250 Code 125 schematic / service manual - ironmill - 12-27-2016

(12-26-2016, 12:20 PM)Radioroslyn Wrote:  Hi Jim and welcome,
It was a common practice in post war sets to use  whatever tubes where available do to war shortages. Have serviced sets with a combo of miniature, locktal, and octal all on one chassis. Electrically the tube are the same just different pin outs. 50A5, 50B5, 50C5, 50L6 all the same barring the socket connections. By the early '50s most had gone with using miniatures and the 50C5 replaced the 50B5 because of the pin layout was prone to have plate to heater shorts.

Thanks Terry.

Regards,
Jim

RE: Philco model 46-250 Code 125 schematic / service manual - DavidHTO - 05-28-2019

Attached is my modification of the schematic for the Philco 46-250 with the tubes and associated mods for Code 125.

My own journey to repair this radio led me to write this blog for my company's website:

https://ez.analog.com/b/engineering-mind/posts/philco-radio-and-the-changing-of-state-of-the-art-technology

David