Philco 610, bakelite condenser voltage rating - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco 610, bakelite condenser voltage rating (/showthread.php?tid=15977)

---

Philco 610, bakelite condenser voltage rating - rck46 - 12-29-2016

Circuit diagram for this radio is at http://www.nostalgiaair.org/pagesbymodel/800/M0013800.pdf



Condenser 32 is a dual 110 mmf condenser in a bakelite block. The number on the block is 8035DG. The working voltage rating for these condensers is 1200v according to the info at http://www.philcorepairbench.com/bblokcap.htm. I put 500 volt caps in this block before realizing what the listed working voltage is. Am I ok or do I need to change the caps to the higher voltage rating?

Bob

---

RE: Philco 610, bakelite condenser voltage rating - Steve Davis - 12-29-2016

These two capacitors only see a few volts. 500 volt caps will be just fine.

Steve

---

RE: Philco 610, bakelite condenser voltage rating - rck46 - 12-29-2016

(12-29-2016, 10:10 PM)Steve Davis Wrote:  These two capacitors only see a few volts. 500 volt caps will be just fine.

Steve

Thanks Steve

---