Kirk's Emerson 804A - Printable Version
+- The PHILCO Phorum (
https://philcoradio.com/phorum)
+-- Forum: Various and Sundry Categories (
https://philcoradio.com/phorum/forumdisplay.php?fid=37)
+--- Forum: Other Radios (Non-Philco) (
https://philcoradio.com/phorum/forumdisplay.php?fid=12)
+--- Thread: Kirk's Emerson 804A (
/showthread.php?tid=15988)
Kirk's Emerson 804A -
morzh - 12-30-2016
Suffices it to say that I started it about 4:30pm and it worked two hrs later. In fact it started working while Kirk was sending me the schematic.
All I have done was
1)recap - 4 tubulars (someone replaced the electrolytic caps)
2) changed bad ballast-rectifier tube
3) replaced a wrong tube (12BA6 was instead of 12BE6). Plus this and another 12BA6 were swapped.
4) soldered the magnetic antenna. It was missing and Kirk told me it was in the tupperware container.
I worked with no sch as I realized the radio is very simikar to the Philco clock radio I just finished. Plus it was not recapped so no damage by others
That was quick!
RE: Kirk's Emerson 804A -
KCMike - 12-30-2016
Sometimes its nice to have an easy restoration that goes well.
RE: Kirk's Emerson 804A -
OldRestorer - 12-30-2016
Yeah,
A n easy restore is great.. How about an easy cabinet or two!
RE: Kirk's Emerson 804A -
KCMike - 12-30-2016
(12-30-2016, 08:47 PM)OldRestorer Wrote: Yeah,
A n easy restore is great.. How about an easy cabinet or two!
I haven't been that lucky yet.
RE: Kirk's Emerson 804A -
morzh - 12-30-2016
(12-30-2016, 08:47 PM)OldRestorer Wrote: Yeah,
A n easy restore is great.. How about an easy cabinet or two!
Easy. Easy? If it were easy you would not give them to me
I make it look easy!
RE: Kirk's Emerson 804A -
Eliot Ness - 01-01-2017
(12-30-2016, 10:31 PM)morzh Wrote: ........I make it look easy!
Our Russian chassis whisperer
RE: Kirk's Emerson 804A -
morzh - 01-01-2017
Yep. They talk to me. Literally.