Philco 42-360 3rd.IF can (32-3640)) - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco 42-360 3rd.IF can (32-3640)) (/showthread.php?tid=17054)

---

Philco 42-360 3rd.IF can (32-3640)) - Radioengineer - 07-24-2017

I am re-capping this 42-360. I found the Primary open on the 3rd. IF can.(32-3640) Red and white wires should be 14 ohms.
What can I replace this with? Also after opening up the can to replace the wires, there are no 100uuf caps  inside the can.The schematic shows  two of these in the can.

---

RE: Philco 42-360 3rd.IF can (32-3640)) - Radioroslyn - 07-24-2017

Got two answers. One connect a rf choke from the red to white wires then a small mica from the white to green wires. Or find a 455kc if output can and replace it or just the open winding.
http://philcoradio.com/phorum/showthread.php?tid=15651
Start reading at post 15.

---

RE: Philco 42-360 3rd.IF can (32-3640)) - klondike98 - 07-24-2017

Hope that thread helps! Terry talked me through it.

---

RE: Philco 42-360 3rd.IF can (32-3640)) - GIZMO - 12-03-2017

Radioengineer this is Gizmo
I have a Philco 42-360 and all the electronics are working. My problem is i need a dial string diagram? The good news is i live in Springfield,Il. not far from Pawnee.
Perhaps we could get together to our mutual benefit.

---