The PHILCO Phorum
40-216 Front Cabinet Light - *Added a pic of a tag - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Home Radios (https://philcoradio.com/phorum/forumdisplay.php?fid=6)
+--- Thread: 40-216 Front Cabinet Light - *Added a pic of a tag (/showthread.php?tid=17267)



40-216 Front Cabinet Light - *Added a pic of a tag - Edisla - 09-13-2017

Is it just the hole or was there some sort of red lamp cover?

I see that the lamp that goes there is the black tipped type so I could see where it may just be a hole and that is it.


RE: 40-216 Front Cabinet Light - OldRestorer - 09-14-2017

I believe you are referring to the gem in the center under the dial?
It is an indicator light. I believe it is to let you know the power is on.

Icon_smile


RE: 40-216 Front Cabinet Light - Edisla - 09-15-2017

Right I get what it is for but is it just supposed to be a hole in the front of the cabinet or is it supposed to be covered by a lamp cover?


RE: 40-216 Front Cabinet Light - Ron Ramirez - 09-15-2017

It originally had a lens which was made of Tenite plastic...which shrank and fell out over the decades.


40-216 Observation - Edisla - 09-16-2017

Still looking over this unit I picked up last weekend. I noticed that on the radio face the far left tab indicates "Television Sound".

That position on the remote control is the 8th position which has a tab inserted labeled with a star.

What I don't get is that there is no "Television/Phono" label on the rear of chassis like my 40-180.

Did the 40-216 even do "Television Sound"?

If not I wonder why it was setup this way.

I can add pics if you need them


RE: 40-216 Questions - klondike98 - 09-16-2017

I merged your two 40-216 threads into a single thread called 40-216 Questions to keep the discussion together as requested in the rules section.


RE: 40-216 Questions - Edisla - 09-16-2017

cool thanks


RE: 40-216 Questions - Edisla - 09-17-2017

Adding this pic if there is info on what it's all about.

Just some sort of intellectual property warning?

[Image: https://i.imgur.com/2Vynd5u.jpg]


RE: 40-216 Front Cabinet Light - *Added a pic of a tag - Edisla - 09-18-2017

I see in the 40-216 documents online that this unit was able to tune to TV sound.

That answers that Icon_smile


RE: 40-216 Front Cabinet Light - *Added a pic of a tag - OldRestorer - 09-18-2017

coooool !


RE: 40-216 Front Cabinet Light - *Added a pic of a tag - Scott D - 09-20-2017

That tag is hilarious! It's look the DO NOT REMOVE UNDER PENALTY OF LAW tag on bedding!


RE: 40-216 Front Cabinet Light - *Added a pic of a tag - Raleigh - 10-10-2017

I don't think these models could tune TV sound off the air, but the TV receiver would rebroadcast the sound on an AM frequency so it could be picked up by an existing radio set. Some of the Philco phonographs would also do this, so there wasn't a need for audio amplifier and speakers.

It seems to me that Philco made a big deal about this. They put a yellow label in the rear of the cabinet saying it was TV ready and even put a "Tele Vision" label in the low frequency push button position as a default. Some radios I've bought still have that label in place, but that push button was just for a low frequency AM station if you didn't use it with your TV.


RE: 40-216 Front Cabinet Light - *Added a pic of a tag - Radioroslyn - 10-10-2017

+1
Similar to the RP series of phonos.


RE: 40-216 Front Cabinet Light - *Added a pic of a tag - Art Hoch - 10-23-2017

I like Murrow's quote!


RE: 40-216 Front Cabinet Light - *Added a pic of a tag - Steve Davis - 10-23-2017

Quote:I like Murrow's quote!


Yes, that is profound Icon_clap

Steve