Eico 324 RF Output cable - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Various and Sundry Categories (https://philcoradio.com/phorum/forumdisplay.php?fid=37)
+--- Forum: Test Equipment (https://philcoradio.com/phorum/forumdisplay.php?fid=31)
+--- Thread: Eico 324 RF Output cable (/showthread.php?tid=18965)

---

Eico 324 RF Output cable - Greggshere - 09-15-2018

I picked up a nice old recapped Eico 324 Signal Generator, but without the  RF output cable. Does anyone know where I can purchase one that will work for this? Is there a way to convert it to some other style? What are my options? Thank you for your input in advance.

---

RE: Eico 324 RF Output cable - Arran - 09-15-2018

It probably used a shielded (not coax) cable with an Amphenol connector, basically like and old fashioned microphone. There are available, at least NOS and used ones are, look it up on fleabay, or on Mouser or Digikey's sites.
Regards
Arran

---

RE: Eico 324 RF Output cable - Radioroslyn - 09-15-2018

What you are seeking is a Switchcraft 2501F. You could swap it over to another style of connector like a bnc or so-239 but if you don't have any other cables that already have these connector on them I wouldn't bother.

---

RE: Eico 324 RF Output cable - Greggshere - 09-15-2018

Thanks Terry!

---

RE: Eico 324 RF Output cable - Kenneth F. Besso Jr. - 09-15-2018

E-Bay sell them,,,,just like NOS

---