philco 89 123 resistors - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: philco 89 123 resistors (/showthread.php?tid=19497)

---

philco 89 123 resistors - Sn1722sn - 01-13-2019

I'm currently restoring a Philco 89 code 123 I just finish replacing all capacitors and now dog bone resistors some are out of tolerance so I'm going to have to order some which I have never had to order any before and the schematics just gives ohms so do they got to be exactly like what's on schematics and if I can't find the exact ohms can I just get close and what watts should I get?

Thanks

---

RE: philco 89 123 resistors - David - 01-13-2019

R-22 is listed as 50000 ohms the modern replacement would be 47000 ohms or 47K. R-8 8000 ohms the modern replacement 7500 ohms or 7.5K. 70000 ohms would be 68000 ohms or 68k. I would go with 1 watt so that the leeds will be long enough. One member on the Phorum did a great job of showing how to make new resistors look like dog bones.

---

RE: philco 89 123 resistors - klondike98 - 01-13-2019

Here is the link to Steve's method for making dog bone redistors.
http://philcoradio.com/phorum/showthread.php?tid=5501

He also sells them on ebay from time to time.

---

RE: philco 89 123 resistors - Sn1722sn - 02-08-2019

OK,I now need a diagram of the dial string the string was broke when I got this radio.
Thanks

---

Philco 89 123 dial string diagram - Sn1722sn - 02-09-2019

Anyone know where I can find a diagram for the dial string for my 89 123

---

RE: Philco 89 123 dial string diagram - KCMike - 02-09-2019

Hello I checked my sams dial string diagrams and couldn't find it. I did find this that might help you.
Go down to next to last post and look at the picture.

http://www.antiqueradios.com/forums/viewtopic.php?t=193224

---

RE: philco 89 123 resistors - klondike98 - 02-09-2019

I merged the two threads into 1.

---