RCA 811K question - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Various and Sundry Categories (https://philcoradio.com/phorum/forumdisplay.php?fid=37)
+--- Forum: Other Radios (Non-Philco) (https://philcoradio.com/phorum/forumdisplay.php?fid=12)
+--- Thread: RCA 811K question (/showthread.php?tid=19785)

---

RCA 811K question - murf - 03-23-2019

Hello fellas,
Have a question concerning my 811k .
Swapping transformers and seem to have lost my wire ID tags on a couple wires coming out of the transformer.
These are the 2 largest dia wires.
One goes to pin 2 on the 6J7 tube and the other goes to pin 7 on the 6J7 tube.
Any chance these wires could be swapped or are they specific to these connections?
Apparently my id tags came off as I removed the transformer from the chassis.
Any help would be much appreciated.
murf

---

RE: RCA 811K question - Radioroslyn - 03-23-2019

As long as you have abt 6vac across the two wires your good. Phase relationship doesn't matter.

---

RE: RCA 811K question - murf - 03-24-2019

Hi Terry,
Just want to make sure I solder them in right the first time.
Sounds like it can go either way.
Thanks to all,
murf

---

RE: RCA 811K question - Ron Ramirez - 03-24-2019

All,

The Philco 39-6 posts have been split off into a thread of their own.

https://www.philcoradio.com/phorum/showthread.php?tid=19786

---

RE: RCA 811K question - Jake Blake - 03-24-2019

I was wondering if that was gonna happen.    Sorry.  

---