Question about A Philco 43-1201 -
Jamesscott - 04-11-2019
I was checking to see if anyone would know where to look for schematics or repair manual.
And what years it was made. Thank You.
RE: Question about A Philco 43-1201 -
Patrick - 04-11-2019
I'll be the first for once. Welcome to the phorum. You might want to recheck the model number and/or post a pic. No model by that number can be found. Might it be a 48-1201?
Pat
RE: Question about A Philco 43-1201 -
Radioroslyn - 04-11-2019
Hi and welcome,
The "1201" was produced from 1946 thru 1948 aka the Bing Crosby set as he was the Philco pitch man in those days. It was pitched in a number of print ads and on his radio show. As for the set itself thru it's run there probably are some circuit differences like an eletrodynamic spkr vs a pm spkr or octal or loktal tubes but to the seasoned service tech of the day it presented little mystery .
RE: Question about A Philco 43-1201 -
Jamesscott - 04-11-2019
Thank you for the information. I will look again the number was hard to see. It may help using the correct model number HAHA.
RE: Question about A Philco 43-1201 -
OldRestorer - 04-11-2019
Hello and welcome!
I have restored a bunch of these. If you need help just let me know...
Kirk
RE: Question about A Philco 43-1201 -
Jamesscott - 04-11-2019
I know it can't be but it looks like a 43-1201
It must be an 8 Thanks.
RE: Question about A Philco 43-1201 -
Patrick - 04-11-2019
We can identify it with a pic.
RE: Question about A Philco 43-1201 -
Jamesscott - 04-11-2019
RE: Question about A Philco 43-1201 -
Patrick - 04-12-2019
Actually, a pic of the radio itself would be more helpful.
RE: Question about A Philco 43-1201 -
35Z5 - 04-12-2019
Sorry guys, that's 43-1201. No doubt a mis-stamp.
Code dates on speaker, transformers, tuning cap etc will give an approx build date.
RE: Question about A Philco 43-1201 -
35Z5 - 04-12-2019
The samp ends too sharply to have been a 8(especially at top & center), we'll just have to agree to disagree.
Maybe someone at Philco was pulling a prank?
RE: Question about A Philco 43-1201 -
Jamesscott - 04-12-2019
Thank you for all the help!
It looks exactly like a 48-1201 so that's what I'm going with.