46-1201 Cabinet Covering - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Cabinet Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=9)
+--- Thread: 46-1201 Cabinet Covering (/showthread.php?tid=19898)

---

46-1201 Cabinet Covering - Bill Diesch - 04-21-2019

Is there a source for the wood grain covering material used on the exterior of these sets? The one that I have really needs the covering replaced.

---

RE: 46-1201 Cabinet Covering - klondike98 - 04-21-2019

Welcome to the Phorum!


The grain look on that model was what is known as a "Photo finish" which is a paper like finish with the grain applied to it.
Models with photo finish are listed in this thread: https://philcoradio.com/library/index.php/shop-talk/general/philco-models-with-photofinish/

There is a DIY tutorial for photo finishes here: https://philcoradio.com/schooley/
I've used those techniques but never on something with so many curved surfaces as the 1201. I'm sure others will have some thoughts.

---

RE: 46-1201 Cabinet Covering - OldRestorer - 04-22-2019

Hello Bill,
 Replacing the photofinish is fairly easy on these. I did a similar lamp radio a few years ago. All you need to do is find the veneer you want to use and print it on a good printer. Then just use adhesive and attach it. Last is to tone or clear as you would any radio. 

The most important thing is to find a proper veneer "photo". I used google to search for a nice walnut grain. 

Message me if you need any help. I have restored 4 or 5 of these 1201's so I know what you will need to get it done.

Kirk 

---