Parts Source - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Parts Source (/showthread.php?tid=2025)

---

Parts Source - Joe Rossi - 09-27-2009

Howdy,

Anyone out there have a source for the male & female 4-pin connector used on the shadowmeter? I've searched the net but, alas, no connector or a reasonable facsimile. I need to get a couple of sets. Thanks,

---

Re: Parts Source - Guest - 10-01-2009

Do a search for Play Things of the Past.

---

Re: Parts Source - Ron Ramirez - 10-01-2009

Play Things of Past

http://www.oldradioparts.com/

You might look around and see if you can find vintage 4-pin connectors such as those used for old radio batteries - the connectors are similar. Or you could hard-wire the shadowmeter to the radio chassis...this was done on some lower-end 1937 Philco models such as the 37-630.

---

Re: Parts Source - Joe Rossi - 10-02-2009

Thanks for the tip. I had to rewire the speaker harness and wanted to be able to disconnect the speaker from the chassis when I'm removing both from the cabinet. It's awkward hanging on to both. Thanks!

---