black box 3615 - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: black box 3615 (/showthread.php?tid=20565)

---

black box 3615 - corey12 - 10-24-2019

i have a philco 40-215,i took that black box 3615 where the power cord comes in and i removed that .05 capacitor from that box but the wires broke off from that capacitor i am putting in a new one so where do i wire the new one in if i look at it from the ground or where the bolt goes in to the right thanks.

---

RE: black box 3615 - LarryFS - 10-24-2019

The Phorum Library has Service Bulletin 289 that shows how to wire new capacitors in the bakelite blocks.  See Figure 1 on first page and Part No 3615 in middle of first page, left column.  There should be a letter code on the 3615 block.  If you just had a single .05 in the block, then the code will be either OSG or OSU.  The text describes what the codes mean.  
See https://philcoradio.com/library/download/service%20info/service%20bulletins/Philco%20Service%20Bulletin%20No.%20289.pdf

---

RE: black box 3615 - corey12 - 10-24-2019

i see it thank you very much.

---