Philco 39-7 alignment - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco 39-7 alignment (/showthread.php?tid=20855)

---

Philco 39-7 alignment - Jimradio - 01-11-2020

Hi guy's, on the schematic for alignment it shows using a .1mf (uf) and a 100mf (uf) for dummy antenna. I don't have a 100uf cap except an electrolytic type. What can I use instead of the 100mf.

Thanks

---

RE: Philco 39-7 alignment - Radioroslyn - 01-11-2020

Methinks you missed a m it's 100mmfd.

---

RE: Philco 39-7 alignment - gregb - 01-11-2020

+1 What Terry said

Gregb

---

RE: Philco 39-7 alignment - Jimradio - 01-11-2020

Thanks guy's for your reply. I did use the 100pf, but the schematic actually shows 100mf and so did other models I checked. However the later ones (models) show 100mmf. I think they must have had a miss print on some of the early models.

Thanks again..........
Jim

---